Product ID:METEC 4010C (SEE SUPP DATA)
MSDS Date:04/10/1991
FSC:3439
NIIN:00-295-6219
MSDS Number: BDVVQ

METALLURGICAL TECHNOLOGIES,INC

14435 MAX ROAD
PEARLAND, TX 77581
US

Emergency Phone: 713-485-7765

Info Phone: 713-485-7765

Cage: 63726

METALLURGICAL TECHNOLOGIES,INC

PEARLAND, TX 77581 US

Telephone: 713-485-7765

Cage: 63726

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 95%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 5%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

LD50 LC50 Mixture:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:BRONCHITIS, EYE IRRITATION.
CHRONIC:SIDEROSIS, CONJUNCTIVITIS.
Explanation of Carcinogenicity:NICKEL IS LISTED BY THE TWO BODIES.
Effects of Overexposure:NO INFORMATION GIVEN ON MSDS BY SUPPLIER. EYE:
MECHANICAL IRRITATION. INHALED:RESPIRATORY IRRITATION, COUGHING.
Medical Cond Aggravated by Exposure:DERMATITIS OR ASTHMA IN THOSE
SENSITIVE TO NICKEL.

First Aid:EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. WASH WITH SOAP &
WATER. INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING AS NEEDED.
INGESTED:IMMEDIA TELY GIVE 2 LARGE GLASSES OF MILK OR WATER AND
INDUCE VOMITING. (NOTHING BY MOUTH IF UNCONSCIOUS.) GET IMMEDIATE
MEDICAL CARE. IF ANY IRRITATION PERSISTS OR IS SEVERE, SEE A
DOCTOR.

Extinguishing Media:SALT, DRY SAND, CLASS D FIRE EXTINGUISHER
Fire Fighting Procedures:DO NOT USE WATER. DO NOT DISTURB BURNING
POWDER UNTIL COOL.
Unusual Fire/Explosion Hazard:NOT CONSIDERED FLAMMABLE;HOWEVER.FINE
POWDER IN THE FORM OF DUST CLOUD CAN BE IGNITED BY A FLAME SOURCE.

Spill Release Procedures:VACUUM CLEANING RECOMMENDED INSTEAD OF DRY
SWEEPING TO AVOID GENERATION OF AIR BORNE DUST.
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY SUPPLIER.

Handling and Storage Precautions:DO NOT STORE ADJACENT TO STRONG
OXIDES.
Other Precautions:NO INFORMATION GIVEN ON MSDS BY SUPPLIER.

Respiratory Protection:NIOSH-APPROVED DUST RESPIRATOR WHENEVER DUST
LEVELS AARE INCOUNTERED.
Ventilation:LOCAL EXHAUST REQUIRED WHENEVER OSHA STANDARD IS EXCEEDED.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
Work Hygienic Practices:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
Supplemental Safety and Health
FORMER MSDS FOR PRODUCT METEC 4010C. THIS MSDS FOR "NSN
3439-00-295-6219". BOTH HAVE THE SAME FORMULATION.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:14500F,8038
Vapor Pres:1 MM
Spec Gravity:POWDER
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY METALLIC POWDER

Stability Indicator/Materials to Avoid:YES
PURE OXYGEN OR OTHER OXIDIZERS.
Stability Condition to Avoid:DUSTING, EXPOSURE TO DIRECT FLAME IN
FINELY DIVIDED FORM.
Hazardous Decomposition Products:CONTACT WITH MINERAL ACIDS LIBERATES
HYDROGEN WHICH MAY BE A FIRE HAZARD.

Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. MANUFACTURER MAKES NO SUGGESTIONS AS TO METHOD OF
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.